| BP26 |
INTRODUCTION TO PAINT REFINISHING |
| DURATION |
4
day(s) |
| INTENDED FOR |
Personnel who have little or no experience of paint or refinishing techniques. |
| OBJECTIVES |
To bring the delegates to a level of competence and confidence that will allow them to play a useful part in the work of a modern paint shop. The course includes a large amount of practical work with access to all the leading paint manufacturers? mixing schemes. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health & Safety requirement in the use of paint materials
2) Refinishing equipment and spray booths
3) The different paint systems available
4) Basic principles of spraying
5) Sealing and masking
6) Priming and flatting
7) Colour identification
8) Top coat application
9) Colour properties and colour matching
10) Fade out repair techniques
11) Paint faults ? prevention and cure |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 12/10/2010 |
15/10/2010 |
4 |
£1,400.00 |
Thatcham |
|
| BP27 |
PAINT PREPARATION TECHNIQUES |
| DURATION |
2
day(s) |
| INTENDED FOR |
Paint shop personnel with limited knowledge in the preparation of vehicles for refinishing work. |
| OBJECTIVES |
To provide an effective foundation of theoretical knowledge and practical skills in preparing vehicles for refinishing and top coat application. The course includes a large amount of practical work. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health & Safety requirements
2) Planning the repair
3) Degreasing and cleaning
4) Abrasive materials
5) Removing corrosion
6) Wet flatting and dry flatting
7) Fillers ? stoppers (application and flatting)
8) Masking
9) Primer application
10) Sealers
11) Stone chip materials
12) Preparation of plastics
13) Reinstatement of galvanised coatings |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 26/10/2010 |
27/10/2010 |
1 |
£700.00 |
Thatcham |
| 14/12/2010 |
15/12/2010 |
6 |
£700.00 |
Thatcham |
|
| BP29 |
PAINT REFINISHING METHODS |
| DURATION |
2
day(s) |
| INTENDED FOR |
Experienced paint shop personnel. |
| OBJECTIVES |
To provide delegates with hands-on experience of Thatcham refinishing methods and the use of advanced colour coats. This is largely a practical course to update the more experienced painter in methods and techniques of paint refinishing with access to all the leading paint manufacturers? mixing schemes. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Wet-on-wet paint system
2) Explanation of Thatcham paint processes
3) Use of coloured primers ? interior and exterior
4) Preparation and application of roll-on primer techniques
5) Paint blending techniques
6) Three coat finishes
7) Masking techniques
8) Smart working practices
9) Identification and rectification of paint faults
10) Future technologies cost comparison exercise
11) Overview of EPA and Health & Safety regulations
12) End of course test paper |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 14/09/2010 |
15/09/2010 |
1 |
£700.00 |
Thatcham |
| 16/11/2010 |
17/11/2010 |
6 |
£700.00 |
Thatcham |
|
| B34 |
PLASTIC REPAIR & REFINISHING |
| DURATION |
2
day(s) |
| INTENDED FOR |
Body/Trim/Paint Technicians, who have limited experience in repair and refinishing techniques and their application to modern vehicle plastics. |
| OBJECTIVES |
To demonstrate the advantages of repairing and refinishing plastic components, thus maintaining a high standard of cost effective accident damage repair. Practical involvement and full participation by all personnel will be required to ensure the overall success of this course. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health & Safety requirements
2) Identification of plastics - locating and using information
3) Equipment available
4) Repair procedures ? welding and bonding
5) Identification of substrates and the correct refinish products
6) Cleaning/preparation procedures
7) Availability of fillers, stoppers etc.
8) Product knowledge of comparative paint systems - adhesion promoters, flexible additives etc.
9) Assessing different types of finishing coats - textured, solid, COB, pearl and matt |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 29/09/2010 |
30/09/2010 |
6 |
£700.00 |
Thatcham |
| 05/10/2010 |
06/10/2010 |
6 |
£700.00 |
Thatcham |
| 01/12/2010 |
02/12/2010 |
6 |
£700.00 |
Thatcham |
|
| CPD2 |
CPD PAINT |
| DURATION |
1
day(s) |
| INTENDED FOR |
Bodyshop personnel who want to update or refresh their knowledge |
| OBJECTIVES |
To allow delegates to gain knowledge of paint refinishing methods and materials including theoretical aspects of colour and resins. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individual’s ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Paint Resin
2) Spray guns
3) Application methods
4) Paint effects
5) Ceramic clear coats
6) Colour theory
7) Paint Faults and remedies
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 05/10/2010 |
05/10/2010 |
5 |
£350.00 |
Thatcham |
| 26/10/2010 |
26/10/2010 |
6 |
£350.00 |
Thatcham |
|
| TA2 |
ATA PAINT TECHNICIAN |
| DURATION |
1
day(s) |
| INTENDED FOR |
Click here for more details |
| OBJECTIVES |
See above link for further details |
| NOTE |
Paint ATA Guidelines for Candidates can be downloaded here.
'Further Guidance for Candidates' from IMI Awards is available here.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
See above link for further details |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 30/09/2010 |
30/09/2010 |
3 |
£400.00 |
Thatcham |
| 14/10/2010 |
14/10/2010 |
4 |
£400.00 |
Thatcham |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA21T |
ATA PAINT SENIOR TECHNICIAN PREPARATION |
| DURATION |
1
day(s) |
| INTENDED FOR |
This course/ coaching session has been developed for senior technicians who don’t require full training but would benefit from update and additional knowledge about certain elements of the senior paint tech ATA. |
| OBJECTIVES |
To update and discuss what standards and knowledge is required for successful completion of a senior paint ATA |
| NOTE |
This is not an in depth training course but is intended to refine the skills and update what is required for completion of repairs/ procedures to Manufacturers/ Thatcham standards and meeting the ATA criteria.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
1) Pre online questions
2) Overview of EPA and Health & Safety regulations
3) Colour theory
4) Cosmetic plastic repairs
5) Application of textured finishes
6) Identification and Application of Paint finishes
7) Local repair techniques (blending / fadeout methods
8) Rectification of Paint Faults
9) Technical information/ Interpretation of data sheets
10) Substrate identification
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 28/09/2010 |
28/09/2010 |
5 |
£350.00 |
Thatcham |
| 12/10/2010 |
12/10/2010 |
5 |
£350.00 |
Thatcham |
| 30/11/2010 |
30/11/2010 |
6 |
£350.00 |
Thatcham |
|
| TA21 |
ATA PAINT TECHNICIAN - SENIOR |
| DURATION |
1
day(s) |
| INTENDED FOR |
Click here for more details |
| OBJECTIVES |
See above link for further details |
| NOTE |
Paint ATA Guidelines for Candidates can be downloaded here.
'Further Guidance for Candidates' from IMI Awards is available here.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
See above link for further details |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 16/09/2010 |
16/09/2010 |
1 |
£400.00 |
Thatcham |
| 29/09/2010 |
29/09/2010 |
2 |
£400.00 |
Thatcham |
| 13/10/2010 |
13/10/2010 |
3 |
£400.00 |
Thatcham |
| 28/10/2010 |
28/10/2010 |
4 |
£400.00 |
Thatcham |
| 18/11/2010 |
18/11/2010 |
4 |
£400.00 |
Thatcham |
| 01/12/2010 |
01/12/2010 |
4 |
£400.00 |
Thatcham |
| 16/12/2010 |
16/12/2010 |
4 |
£400.00 |
Thatcham |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA2R |
ATA PAINT RETAKES |
| DURATION |
1
day(s) |
| INTENDED FOR |
Delegates that have been referred after taking either the ATA Paint Technician(TA2) or the ATA Senior Paint Technician (TA21) |
| OBJECTIVES |
To complete the Paint Technician and Senior Paint Technician ATA Accreditation |
| NOTE |
We have designed this particular session for any candidates that have been on an ATA and referred. However it is only available for candidates who have been referred on one or two practical elements.
If a candidate has been referred on three or more practical elements, they will be required to resit a whole new assessment from scratch and would therefore need to apply to attend the TA4P sessions.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
The price of this assessment will vary depending on the elements that the individual delegate needs to retake. Please discuss the price with our ATA team on 01635 294851 |
| CONTENT |
See details for ATA Paint Technician (TA2) and
ATA Senior Paint Technician (TA21) |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 15/10/2010 |
15/10/2010 |
4 |
POA |
Thatcham |
| 02/12/2010 |
02/12/2010 |
4 |
POA |
Thatcham |
| 17/12/2010 |
17/12/2010 |
4 |
POA |
Thatcham |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA-IT |
ATA TASK INTENSIVE TRAINING |
| DURATION |
0.5
day(s) |
| INTENDED FOR |
Delegates who have been referred after taking either the ATA Technician Accreditation or the ATA Senior Technician Accreditation |
| OBJECTIVES |
To undertake intensive training in the task/s relating to the referral items in their particular discipline for the ATA Accreditation |
| NOTE |
We have designed this particular session for any delegates that have undertaken an ATA and have been referred. However, it is only available for delegates who have been referred on one or two elements.
The cost of this intensive training will be charged at £195 + vat per delegate.
Once the delegate has attended the intensive training, they will be able to undertake a retake for those referred tasks in their chosen discipline.
The price of a partial retake will vary depending on the particular elements on which the individual delegate has been referred.
If a delegate has been referred on three or more practical elements, it is highly recommended that the delegate attends the Preparation course designed for their relevant discipline, prior to a full retake of their particular assessment.
The IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning. |
| CONTENT |
See details for ATA Technician or ATA Senior Technician for the delegates chosen discipline in the ATA Registered Bodyshop Technician section of our web site |
| AVAILABLE DATES |
No current dates are available.
|
|
|
