| B30 |
MECHANICAL/ELECTRICAL ASPECTS OF BODY REPAIR |
| DURATION |
2
day(s) |
| INTENDED FOR |
Bodyshop technicians involved in all aspects of mechanical, electrical and trim work during automotive repairs. |
| OBJECTIVES |
To assist engineers and repairers in understanding the many complex systems on today's vehicles by providing an overview of the mechanical aspects of the repair process. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Legislation
2) SRS deployment criteria and operational principles
3) ABS/traction control systems
4) Vehicle electrical systems
5) Correlation and preparation of repair data/information
6) Practical use of workshop equipment
7) Fundamentals of air conditioning
8) 4 wheel alignment processes and procedures
9) Overview of LPG
This course will include practical and classroom sessions |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 09/09/2010 |
10/09/2010 |
3 |
£700.00 |
Thatcham |
| 07/10/2010 |
08/10/2010 |
5 |
£700.00 |
Thatcham |
| 14/10/2010 |
15/10/2010 |
6 |
£700.00 |
Thatcham |
| 20/10/2010 |
21/10/2010 |
6 |
£700.00 |
Thatcham |
| 26/10/2010 |
27/10/2010 |
6 |
£700.00 |
Thatcham |
| 11/11/2010 |
12/11/2010 |
6 |
£700.00 |
Thatcham |
| 22/11/2010 |
23/11/2010 |
6 |
£700.00 |
Thatcham |
|
| BM11 |
AIR CONDITIONING |
| DURATION |
1
day(s) |
| INTENDED FOR |
Bodyshop technicians |
| OBJECTIVES |
To inform delegates of the new legislation / regulations relating to handling and servicing A/C system (Reclaim and Recharge).
Delegates will be fully involved in all aspects of A/C, as this course has been designed to underpin all competences of the A/C ATA
accreditation for refrigerant handling. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health & Safety
2) Knowledge of new regulations and legislation relating to handling and awareness of potential green house gases
3) A/C system components and knowledge of operation
4) Handling A/C cylinder
5) Refrigeration identification
6) Use of mobile A/C machine
7) Leak checking system and cylinder
8) Practical and Theory assessment |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 09/09/2010 |
09/09/2010 |
4 |
£350.00 |
Thatcham |
| 14/09/2010 |
14/09/2010 |
3 |
£350.00 |
Thatcham |
| 21/09/2010 |
21/09/2010 |
4 |
£350.00 |
Thatcham |
| 05/10/2010 |
05/10/2010 |
4 |
£350.00 |
Thatcham |
| 12/10/2010 |
12/10/2010 |
4 |
£350.00 |
Thatcham |
| 21/10/2010 |
21/10/2010 |
4 |
£350.00 |
Thatcham |
| 01/11/2010 |
01/11/2010 |
4 |
£350.00 |
Thatcham |
| 09/11/2010 |
09/11/2010 |
4 |
£350.00 |
Thatcham |
| 25/11/2010 |
25/11/2010 |
4 |
£350.00 |
Thatcham |
|
| BM10 |
AIRBAG & RESTRAINT SYSTEMS |
| DURATION |
1
day(s) |
| INTENDED FOR |
Bodyshop technicians who have little or no experience with SRS systems. |
| OBJECTIVES |
To provide technicians with the appropriate knowledge in SRS systems and working practice which will assist them in their day to day activities. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health & Safety requirements
2) Principles of SRS systems
3) Removal and installation of systems
4) Collation of repair data |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 13/09/2010 |
13/09/2010 |
8 |
£350.00 |
Thatcham |
| 22/09/2010 |
22/09/2010 |
8 |
£350.00 |
Thatcham |
| 24/09/2010 |
24/09/2010 |
8 |
£350.00 |
Thatcham |
| 04/10/2010 |
04/10/2010 |
8 |
£350.00 |
Thatcham |
| 11/10/2010 |
11/10/2010 |
8 |
£350.00 |
Thatcham |
| 20/10/2010 |
20/10/2010 |
8 |
£350.00 |
Thatcham |
| 29/10/2010 |
29/10/2010 |
8 |
£350.00 |
Thatcham |
| 24/11/2010 |
24/11/2010 |
8 |
£350.00 |
Thatcham |
|
| BM13 |
4 WHEEL ALIGNMENT |
| DURATION |
2
day(s) |
| INTENDED FOR |
Bodyshop technicians who carry out this aspect of repair to accident damaged vehicles and need to further their knowledge using current equipment. |
| OBJECTIVES |
This course is designed to give the bodyshop technician an understanding of 4 wheel alignment along with theory, angles measured, and any pre-requisites necessary to carry out a check. The course also covers possible suspension defects and the effects this could have on tyre wear and the handling performance of a vehicle. This course contains a high practical content and full participation by delegates will be required. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Theory of angles
2) Pre-geometry requisites
3) Correlation and preparation of repair data
4) Adjustment procedures
5) Component replacement |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 15/09/2010 |
16/09/2010 |
FULL |
£700.00 |
Thatcham |
| 22/09/2010 |
23/09/2010 |
5 |
£700.00 |
Thatcham |
| 27/09/2010 |
28/09/2010 |
6 |
£700.00 |
Thatcham |
| 14/10/2010 |
15/10/2010 |
6 |
£700.00 |
Thatcham |
| 18/10/2010 |
19/10/2010 |
6 |
£700.00 |
Thatcham |
| 01/11/2010 |
02/11/2010 |
4 |
£700.00 |
Thatcham |
| 02/12/2010 |
03/12/2010 |
6 |
£700.00 |
Thatcham |
| 13/12/2010 |
14/12/2010 |
FULL |
£700.00 |
Thatcham |
|
| BM17 |
BASIC VEHICLE ELECTRICS & ABS, TCS, & EBD |
| DURATION |
1
day(s) |
| INTENDED FOR |
Personnel with little or no experience of vehicle electrics who wish to gain a basic understanding of vehicle wiring, diagnosis and repair techniques. |
| OBJECTIVES |
To gain a basic working knowledge of vehicle wiring and component operation. How to use a multimeter and how to diagnose wiring faults leading to a basic operational understanding. This course contains practical content and full participation by delegates will be required. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health & Safety requirements
2) Overview of vehicle wiring
3) Component location and operation
4) Basic diagnostic techniques
5) Understanding and usage of multimeters
6) Component wiring repair |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 24/09/2010 |
24/09/2010 |
6 |
£350.00 |
Thatcham |
| 29/09/2010 |
29/09/2010 |
8 |
£350.00 |
Thatcham |
| 04/10/2010 |
04/10/2010 |
8 |
£350.00 |
Thatcham |
| 14/10/2010 |
14/10/2010 |
8 |
£350.00 |
Thatcham |
| 15/10/2010 |
15/10/2010 |
8 |
£350.00 |
Thatcham |
| 25/10/2010 |
25/10/2010 |
8 |
£350.00 |
Thatcham |
| 05/11/2010 |
05/11/2010 |
8 |
£350.00 |
Thatcham |
| 15/11/2010 |
15/11/2010 |
8 |
£350.00 |
Thatcham |
|
| CPD3 |
CPD M.E.T |
| DURATION |
1
day(s) |
| INTENDED FOR |
Bodyshop personnel who want to update or refresh their knowledge |
| OBJECTIVES |
To allow delegates to gain knowledge of Mechanical Electrical and Trim aspects of the repair process, including safety related items and removal and refit of components. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individual’s ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) SRS components
2) Thatcham methods
3) Steering geometry
4) Air conditioning
5) Glazing methods
6) Manufacturer’s abbreviations
7) Practical a/c drain and recharge
8) Practical geometry check
9) Practical airbag removal and deployment
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 13/09/2010 |
13/09/2010 |
4 |
£350.00 |
Thatcham |
| 24/09/2010 |
24/09/2010 |
6 |
£350.00 |
Thatcham |
| 29/10/2010 |
29/10/2010 |
6 |
£350.00 |
Thatcham |
| 15/12/2010 |
15/12/2010 |
6 |
£350.00 |
Thatcham |
|
| TA3 |
ATA M.E.T TECHNICIAN |
| DURATION |
1
day(s) |
| INTENDED FOR |
Click here for more details |
| OBJECTIVES |
See above link for further details |
| NOTE |
M.E.T ATA Guidelines for Candidates can be downloaded here.
'Further Guidance for Candidates' from IMI Awards is available here.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
See above link for further details |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 15/09/2010 |
15/09/2010 |
4 |
£400.00 |
Thatcham |
| 17/09/2010 |
17/09/2010 |
4 |
£400.00 |
Thatcham |
| 05/10/2010 |
05/10/2010 |
4 |
£400.00 |
Thatcham |
| 29/10/2010 |
29/10/2010 |
4 |
£400.00 |
Thatcham |
| 03/11/2010 |
03/11/2010 |
2 |
£400.00 |
Thatcham |
| 03/12/2010 |
03/12/2010 |
4 |
£400.00 |
Thatcham |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA3L |
ATA M.E.T LIGHT |
| DURATION |
0.5
day(s) |
| INTENDED FOR |
Click here for more details on the M.E.T ATA
This is an additional ATA Module for MET and technicians must meet the specified pre-requisites before they may take an assessment. To be eligible, a technician must hold a valid ATA ID card in any route i.e. Light Vehicle,
Air Conditioning, Motorcycle, Panel or Paint Senior.
More information is available from the IMI. |
| OBJECTIVES |
See above link for further details
When successful, the technician will receive an official ‘ATA Modular Certificate’ for M.E.T. |
| NOTE |
M.E.T ATA Guidelines for Candidates can be downloaded here.
'Further Guidance for Candidates' from IMI Awards is available here.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
To achieve the ATA Additional module for MET, the technician must successfully complete both an u nderpinnig knowledge test and a practical assessment
Practical assessments:
1) Remove and refit vehicle trim (door card)
2) Remove and refit a door lock, fittings, door electrical components & exterior handle
3) Remove and refit a bumper cover, including associated lamps and fittings
4) Remove and refit a headlamp assembly
UnderPinning Knowledge (UPK) test:
The online UPK test consists of 30 questions and includes the following areas to ensure that the technician has the
underpinning knowledge of M.E.T.
1) Health and Safety
2) M.E.T working practices
3) M.E.T fitting procedures
4) M.E.T component knowledge
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 17/09/2010 |
17/09/2010 |
1 |
£300.00 |
Thatcham |
| 17/09/2010 |
17/09/2010 |
FULL |
£300.00 |
Thatcham |
| 21/09/2010 |
21/09/2010 |
2 |
£300.00 |
Thatcham |
| 21/09/2010 |
21/09/2010 |
2 |
£300.00 |
Thatcham |
| 22/09/2010 |
22/09/2010 |
2 |
£300.00 |
Thatcham |
| 15/10/2010 |
15/10/2010 |
2 |
£300.00 |
Thatcham |
| 15/10/2010 |
15/10/2010 |
2 |
£300.00 |
Thatcham |
| 16/11/2010 |
16/11/2010 |
2 |
£300.00 |
Thatcham |
| 16/11/2010 |
16/11/2010 |
2 |
£300.00 |
Thatcham |
| 10/12/2010 |
10/12/2010 |
2 |
£300.00 |
Thatcham |
| 10/12/2010 |
10/12/2010 |
2 |
£300.00 |
Thatcham |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA31T |
ATA M.E.T SENIOR TECHNICIAN PREPARATION |
| DURATION |
2
day(s) |
| INTENDED FOR |
Technicians who require a refresher in MET aspects of body repairs, to under take the ATA |
| OBJECTIVES |
To advise technicians of the appropriate knowledge and required skills, to successfully complete the ATA. |
| NOTE |
This training course does not guarantee a pass, however does advise technicians of the required competencies for accreditation.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
This course carries a high practical content
1) Air Conditioning
Principles of both basic and climate control A/C systems operation
Delegates will be able to reclaim, vacuum a system, recharge and check operating requirements along with leak checking procedures.
2) Basic Vehicle Electrics
The correct use of a multi-meter in fault finding, how to read appropriate wiring and data sheets, and tracing set practical faults on ATA.
3) Wheel Alignment
Understanding 4 wheel alignment prerequisites, along with angles measured and setting vehicles to manufacturer’s data.
The working out of target data, for setting vehicle’s on an ATA.
4) Air bag
Working practice associated with the removal and refitting of an air bag, along with the correct storage of SRS components.
Correlation of the repair data, along with the use of special tools for the required tasks set.
5) MET Components
Repair methodology, and the correct procedures when removing and refitting mechanical and trim components, during vehicle repairs.
The correct interpretation of data, and special tool requirements to carry out set tasks on the ATA. |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 13/09/2010 |
14/09/2010 |
6 |
£700.00 |
Thatcham |
| 20/09/2010 |
21/09/2010 |
4 |
£700.00 |
Thatcham |
| 27/09/2010 |
28/09/2010 |
6 |
£700.00 |
Thatcham |
| 04/10/2010 |
05/10/2010 |
6 |
£700.00 |
Thatcham |
| 11/10/2010 |
12/10/2010 |
6 |
£700.00 |
Thatcham |
| 18/10/2010 |
19/10/2010 |
6 |
£700.00 |
Thatcham |
| 25/10/2010 |
26/10/2010 |
6 |
£700.00 |
Thatcham |
| 08/11/2010 |
09/11/2010 |
6 |
£700.00 |
Thatcham |
| 22/11/2010 |
23/11/2010 |
6 |
£700.00 |
Thatcham |
| 29/11/2010 |
30/11/2010 |
6 |
£700.00 |
Thatcham |
| 06/12/2010 |
07/12/2010 |
6 |
£700.00 |
Thatcham |
|
| TA31 |
ATA M.E.T TECHNICIAN - SENIOR |
| DURATION |
2
day(s) |
| INTENDED FOR |
Click here for more details |
| OBJECTIVES |
See above link for further details |
| NOTE |
The Air Conditioning Assessment undertaken as part of the ATA 'Senior MET Technician' Assessment or the ATA Air Conditioning 'Refrigerant Handler' Assessment meets the minimum European Union (EU) requirements as set out in EC Regulation (EC) No. 307/2008.
M.E.T ATA Guidelines for Candidates can be downloaded here.
'Further Guidance for Candidates' from IMI Awards is available here.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
See above link for further details |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 09/09/2010 |
10/09/2010 |
FULL |
£850.00 |
Thatcham |
| 22/09/2010 |
23/09/2010 |
2 |
£850.00 |
Thatcham |
| 29/09/2010 |
30/09/2010 |
4 |
£850.00 |
Thatcham |
| 06/10/2010 |
07/10/2010 |
4 |
£850.00 |
Thatcham |
| 13/10/2010 |
14/10/2010 |
3 |
£850.00 |
Thatcham |
| 20/10/2010 |
21/10/2010 |
4 |
£850.00 |
Thatcham |
| 27/10/2010 |
28/10/2010 |
2 |
£850.00 |
Thatcham |
| 10/11/2010 |
11/11/2010 |
4 |
£850.00 |
Thatcham |
| 24/11/2010 |
25/11/2010 |
4 |
£850.00 |
Thatcham |
| 01/12/2010 |
02/12/2010 |
4 |
£850.00 |
Thatcham |
| 08/12/2010 |
09/12/2010 |
4 |
£850.00 |
Thatcham |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA3R |
ATA M.E.T RETAKES |
| DURATION |
1
day(s) |
| INTENDED FOR |
Delegates that have been referred after taking either the ATA M.E.T Technician (TA3) or the ATA M.E.T Technician - Senior (TA31) |
| OBJECTIVES |
To complete the M.E.T Technician and Senior M.E.T Technician ATA Accreditation |
| NOTE |
We have designed this particular session for any candidates that have been on an ATA and referred. However it is only available for candidates who have been referred on one or two practical elements.
If a candidate has been referred on three or more practical elements, they will be required to resit a whole new assessment from scratch and would therefore need to apply to attend the TA4P sessions.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
The price of this assessment will vary depending on the elements that the individual delegate needs to retake. Please discuss the price with our ATA team on 01635 294851 |
| CONTENT |
See details for ATA M.E.T Technician (TA3) and
ATA M.E.T Technician - Senior (TA31) |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 24/09/2010 |
24/09/2010 |
4 |
POA |
Thatcham |
| 01/10/2010 |
01/10/2010 |
4 |
POA |
Thatcham |
| 08/10/2010 |
08/10/2010 |
4 |
POA |
Thatcham |
| 15/10/2010 |
15/10/2010 |
4 |
POA |
Thatcham |
| 22/10/2010 |
22/10/2010 |
4 |
POA |
Thatcham |
| 05/11/2010 |
05/11/2010 |
4 |
POA |
Thatcham |
| 12/11/2010 |
12/11/2010 |
4 |
POA |
Thatcham |
| 26/11/2010 |
26/11/2010 |
4 |
POA |
Thatcham |
| 09/12/2010 |
09/12/2010 |
4 |
POA |
Thatcham |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA5 |
ATA AIR CONDITIONING - REFRIGERANT HANDLING |
| DURATION |
0.5
day(s) |
| INTENDED FOR |
The ATA assessments should be of interest for companies aiming to achieve the BSI Kitemark Standard in view of the recently released PAS 125 document. It may also be of interest for those technicians working within the industry who wish to attain recognition for their level of skills.
A 1 day assessment to assess a candidates underpinning knowledge by on-line test and their practical skills by a series of workshop tasks relating to their occupation. |
| OBJECTIVES |
Upon successful completion of all the elements of the assessments day the candidate will have demonstrated their competence at Technician Level. |
| NOTE |
The Air Conditioning Assessment undertaken as part of the ATA 'Senior MET Technician' Assessment or the ATA Air Conditioning 'Refrigerant Handler' Assessment meets the minimum European Union (EU) requirements as set out in EC Regulation (EC) No. 307/2008.
Air Conditioning ATA Guidelines for Candidates can be downloaded here.
'Further Guidance for Candidates' from IMI Awards is available here.
Successful candidates will be issued with an ATA card which will be valid for 5 years from the date of completion.
Pre-Requisite: A minimum of 3 months experience in an appropriate role. |
| CONTENT |
The AC-Refrigerant Handler Technician assessment will comprise of an on line knowledge test and a practical assessment. These should identify the competence of the technician and best practice throughout the assessments.
The practical assessments to include the following vehicle areas:
- Health and Safety, regulations, correct use of PPE and guidelines throughout the practical assessments
- Procedures for handling AC refrigerant
- Recovery from a MVAC
- Recycling of refrigerant
- Recharging of an AC system
- Leak detection (inc knowledge of at least two methods of checking for AC leaks)
- Store and transfer any waste material following current legal requirements and necessary documentation to support
|
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 10/09/2010 |
10/09/2010 |
2 |
£300.00 |
Thatcham |
| 10/09/2010 |
10/09/2010 |
2 |
£300.00 |
Thatcham |
| 15/09/2010 |
15/09/2010 |
2 |
£300.00 |
Thatcham |
| 15/09/2010 |
15/09/2010 |
2 |
£300.00 |
Thatcham |
| 22/09/2010 |
22/09/2010 |
2 |
£300.00 |
Thatcham |
| 22/09/2010 |
22/09/2010 |
2 |
£300.00 |
Thatcham |
| 06/10/2010 |
06/10/2010 |
2 |
£300.00 |
Thatcham |
| 06/10/2010 |
06/10/2010 |
2 |
£300.00 |
Thatcham |
| 13/10/2010 |
13/10/2010 |
2 |
£300.00 |
Thatcham |
| 13/10/2010 |
13/10/2010 |
2 |
£300.00 |
Thatcham |
| 13/10/2010 |
13/10/2010 |
2 |
£300.00 |
Thatcham |
| 22/10/2010 |
22/10/2010 |
2 |
£300.00 |
Thatcham |
| 22/10/2010 |
22/10/2010 |
2 |
£300.00 |
Thatcham |
| 02/11/2010 |
02/11/2010 |
2 |
£300.00 |
Thatcham |
| 10/11/2010 |
10/11/2010 |
2 |
£300.00 |
Thatcham |
| 10/11/2010 |
10/11/2010 |
2 |
£300.00 |
Thatcham |
| 26/11/2010 |
26/11/2010 |
2 |
£300.00 |
Thatcham |
| 26/11/2010 |
26/11/2010 |
2 |
£300.00 |
Thatcham |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA-IT |
ATA TASK INTENSIVE TRAINING |
| DURATION |
0.5
day(s) |
| INTENDED FOR |
Delegates who have been referred after taking either the ATA Technician Accreditation or the ATA Senior Technician Accreditation |
| OBJECTIVES |
To undertake intensive training in the task/s relating to the referral items in their particular discipline for the ATA Accreditation |
| NOTE |
We have designed this particular session for any delegates that have undertaken an ATA and have been referred. However, it is only available for delegates who have been referred on one or two elements.
The cost of this intensive training will be charged at £195 + vat per delegate.
Once the delegate has attended the intensive training, they will be able to undertake a retake for those referred tasks in their chosen discipline.
The price of a partial retake will vary depending on the particular elements on which the individual delegate has been referred.
If a delegate has been referred on three or more practical elements, it is highly recommended that the delegate attends the Preparation course designed for their relevant discipline, prior to a full retake of their particular assessment.
The IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning. |
| CONTENT |
See details for ATA Technician or ATA Senior Technician for the delegates chosen discipline in the ATA Registered Bodyshop Technician section of our web site |
| AVAILABLE DATES |
No current dates are available.
|
|
|
