| TA11B |
ATA SENIOR PANEL AOM PREP |
| DURATION |
1
day(s) |
| INTENDED FOR |
This course is preparation for Panel technicians who wish to retain their Senior ATA accrediation by following the Assessed Outcome Modules route. |
| OBJECTIVES |
To ensure that technicians have the necessary skills and knowledge and are fully prepared before attempting to retain ATA through the Assessed Outcome Modules route. |
| NOTE |
When attempting to retain Senior Panel ATA through this Assessed Outcome Modules route, or for the full Senior Panel Assesment, candidates need to have achieved the welding standard for BS 4872 and BS 1140.
This can be achieved via Thatcham's Intensive Welding & Test course. |
| CONTENT |
Preparation for the following modules
- AOM-006 M.E.T. Complex
- AOM-030 Welded Panel/Section MAG/MIG Braze/Bond/Rivet
Click here for full details on each of these modules. |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
May
No current dates are available.
| Start Date |
End Date |
Cost (excl. VAT) |
Location |
Places Left |
| 06/06/2013 |
06/06/2013 |
£300.00 |
Thatcham |
Call Sales on
01635 293174
|
| 17/06/2013 |
17/06/2013 |
£300.00 |
Thatcham |
3
|
| 20/06/2013 |
20/06/2013 |
£300.00 |
Thatcham |
3
|
July
| Start Date |
End Date |
Cost (excl. VAT) |
Location |
Places Left |
| 01/07/2013 |
01/07/2013 |
£300.00 |
Thatcham |
4
|
| 08/07/2013 |
08/07/2013 |
£300.00 |
Thatcham |
2
|
August
| Start Date |
End Date |
Cost (excl. VAT) |
Location |
Places Left |
| 12/08/2013 |
12/08/2013 |
£400.00 |
Thatcham |
4
|
|
| TA11A |
ATA SENIOR PANEL TECHNICIAN AOM UPDATE |
| DURATION |
1
day(s) |
| INTENDED FOR |
Panel technicians who wish to retain their Senior ATA accrediation by following the Assessed Outcome Modules route. |
| OBJECTIVES |
To achieve Senior Panel ATA through the Assessed Outcome Modules route. |
| NOTE |
When attempting to retain Senior Panel ATA through this Assessed Outcome Modules route, or for the full Senior Panel Assesment, candidates need to have achieved the welding standard for BS 4872 and BS 1140.
This can be achieved via Thatcham's Intensive Welding & Test course. |
| CONTENT |
The following modules must be successfully completed in order to retain Senior Panel ATA through the Assessed Outcome Modules route.
- AOM-006 M.E.T. Complex
- AOM-030 Welded Panel/Section MAG/MIG Braze/Bond/Rivet
Click here for full details on each of these modules.
Candidates must successfuly complete an on line test associated with each of the above modules. |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
May
No current dates are available.
| Start Date |
End Date |
Cost (excl. VAT) |
Location |
Places Left |
| 18/06/2013 |
18/06/2013 |
£495.00 |
Thatcham |
Call Sales on
01635 293174
|
| 21/06/2013 |
21/06/2013 |
£495.00 |
Thatcham |
2
|
July
| Start Date |
End Date |
Cost (excl. VAT) |
Location |
Places Left |
| 09/07/2013 |
09/07/2013 |
£495.00 |
Thatcham |
2
|
August
| Start Date |
End Date |
Cost (excl. VAT) |
Location |
Places Left |
| 13/08/2013 |
13/08/2013 |
£495.00 |
Thatcham |
4
|
Please note that the prices shown above are exclusive of VAT and are subject to change.
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA11T |
ATA SENIOR PANEL TECHNICIAN - FULL ASSESSMENT PREPARATION |
| DURATION |
2
day(s) |
| INTENDED FOR |
This course is preparation for Panel technicians who are not currently in possession of a Senior ATA and who therefore need to take the full assessment |
| OBJECTIVES |
To ensure that technicians have the necessary skills and knowledge and are fully prepared before attempting to achieve full ATA assessment. |
| NOTE |
When attempting to retain Senior Panel ATA through the Assessed Outcome Modules route, or for this full Senior Panel Assesment, candidates need to have achieved the welding standard for BS 4872 and BS 1140.
This can be achieved via Thatcham's Intensive Welding & Test course. |
| CONTENT |
This course is preparation for the following modules
- AOM-002 Cosmetic Panel Alignment
- AOM-006 M.E.T. Complex
- AOM-029 Panel Damage (Rectification)
- AOM-030 Welded Panel/Section MAG/MIG Braze/Bond/Rivet
- AOM-032 Rectify Bodyshell Misalignment (set up, measure, adjust)
- AOM-034 Aluminium Cosmetic Panel
- AOM-048 Cold Filler Repair
Click here for full details of each module. |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
May
No current dates are available.
| Start Date |
End Date |
Cost (excl. VAT) |
Location |
Places Left |
| 17/06/2013 |
18/06/2013 |
£700.00 |
Thatcham |
3
|
July
| Start Date |
End Date |
Cost (excl. VAT) |
Location |
Places Left |
| 01/07/2013 |
02/07/2013 |
£700.00 |
Thatcham |
6
|
| 15/07/2013 |
16/07/2013 |
£700.00 |
Thatcham |
5
|
August
No current dates are available.
|
| TA11 |
ATA SENIOR PANEL TECHNICIAN - FULL ASSESSMENT |
| DURATION |
3
day(s) |
| INTENDED FOR |
Techncians who are not currently in possession of a Senior ATA and who therefore wish to take the full assessment. |
| OBJECTIVES |
To successfullly complete the ATA Senior Panel technician tasks to achieve full ATA assessment |
| NOTE |
When attempting to retain Senior Panel ATA through the Assessed Outcome Modules route, or for this full Senior Panel Assesment, candidates need to have achieved the welding standard for BS 4872 and BS 1140.
This can be achieved via Thatcham's Intensive Welding & Test course. |
| CONTENT |
Candidates must complete all of the below modules and succsessfully pass the on line tests which are associated with each module.
- AOM-002 Cosmetic Panel Alignment
- AOM-006 M.E.T. Complex
- AOM-029 Panel Damage (Rectification)
- AOM-030 Welded Panel/Section MAG/MIG Braze/Bond/Rivet
- AOM-032 Rectify Bodyshell Misalignment (set up, measure, adjust)
- AOM-034 Aluminium Cosmetic Panel
- AOM-048 Cold Filler Repair
Click here for full details of each module. |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
May
No current dates are available.
| Start Date |
End Date |
Cost (excl. VAT) |
Location |
Places Left |
| 19/06/2013 |
21/06/2013 |
£1,275.00 |
Thatcham |
1
|
July
| Start Date |
End Date |
Cost (excl. VAT) |
Location |
Places Left |
| 03/07/2013 |
05/07/2013 |
£1,275.00 |
Thatcham |
4
|
| 17/07/2013 |
19/07/2013 |
£1,275.00 |
Thatcham |
3
|
August
No current dates are available.
Please note that the prices shown above are exclusive of VAT and are subject to change.
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA91T |
ATA COSMETIC REPAIR SENIOR TECHNICIAN PREPARATION |
| DURATION |
2
day(s) |
| INTENDED FOR |
This course/ coaching session has been developed for senior technicians who don’t require full training but would benefit from update and additional knowledge about certain elements of the Cosmetic Repair Senior Panel Technician ATA. |
| OBJECTIVES |
To undertake practical refresher training along with relevant underpinning knowledge in preparation for successful completion of the Cosmetic Repair Senior Panel Technician ATA. |
| NOTE |
This is not an in depth training course but is intended to refine the skills and update what is required for completion of repairs/ procedures to manufacturers/ Thatcham standards and meeting the ATA criteria.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
1) 3 stage Pearlescent (panel preparation & fade out)
2) Plastic repair of a cosmetic panel (application of foundation materials)
3) Cold filler repair
4) Primer – application, drying & flatting
5) Surface preparation (new panel)
6) Aluminium cosmetic panel (minor)
7) Panel damage rectification (using workshop equipment pin pull)
8) Mechanical Electrical &Trim (remove/replace/refit)
9) Visual vehicle appraisal |
| AVAILABLE DATES |
May
No current dates are available.
No current dates are available.
No current dates are available.
No current dates are available.
|
| TA91 |
ATA COSMETIC REPAIR SENIOR TECHNICIAN |
| DURATION |
2
day(s) |
| INTENDED FOR |
Bodyshop technicians, Vehicle Damage Assessors and anyone required to carry out and understand cosmetic panel repair. |
| OBJECTIVES |
To achieve the Cosmetic ATA at Senior Technician level |
| NOTE |
Click here for The IMI's oveview of the Cosmetic Repair ATA.
'Further Guidance for Candidates' from IMI Awards is available here.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
The Cosmetic Repair ATA assessment will comprise of an on line knowledge test and practical assessments, to identify the competence of the technician and best practice throughout the assessments. The practical tasks will include:
1) 3 stage Pearlescent (panel preparation & fade out)
2) Plastic repair of a cosmetic panel (application of foundation materials)
3) Cold filler repair
4) Primer – application, drying & flatting
5) Surface preparation (new panel)
6) Aluminium cosmetic panel (minor)
7) Panel damage rectification (using workshop equipment pin pull)
8) Mechanical Electrical &Trim (remove/replace/refit)
9) Visual vehicle appraisal |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
May
No current dates are available.
No current dates are available.
No current dates are available.
No current dates are available.
Please note that the prices shown above are exclusive of VAT and are subject to change.
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
|
|
