| B10 |
PANEL REPAIR REPLACEMENT |
| DURATION |
4
day(s) |
| INTENDED FOR |
Personnel/Apprentices who are new to the bodyshop and require training on using up to date methods and equipment to achieve a recognised standard. |
| OBJECTIVES |
To be able to work logically and to the correct repair procedures, from planning and panel removal, through to replacing a panel. The primary objectives are that the original specification of the vehicle is maintained and to improve the participants' awareness of Health, Safety and Quality requirements, whilst making panel replacement as simple as possible. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health & Safety requirements
2) Correlation and preparation of repair data/information
3) Body damage analysis
4) Removal and replacement procedures for panels
5) Correct welding procedures - MIG and resistance spot
6) Eradication of panel defects
7) Cold filling - preparation, application and finishing
8) Correct use of power hand tools
9) Correct alignment of bolted cosmetic panels / doors, bonnets, wings etc.
10) Application of body sealants
11) Quality control requirements |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 13/09/2010 |
16/09/2010 |
6 |
£1,400.00 |
Thatcham |
| 27/09/2010 |
30/09/2010 |
6 |
£1,400.00 |
Thatcham |
| 11/10/2010 |
14/10/2010 |
6 |
£1,400.00 |
Thatcham |
| 18/10/2010 |
21/10/2010 |
6 |
£1,400.00 |
Thatcham |
| 25/10/2010 |
28/10/2010 |
5 |
£1,400.00 |
Nuneaton |
| 01/11/2010 |
04/11/2010 |
6 |
£1,400.00 |
Nuneaton |
| 01/11/2010 |
04/11/2010 |
6 |
£1,400.00 |
Thatcham |
| 15/11/2010 |
18/11/2010 |
6 |
£1,400.00 |
Thatcham |
| 22/11/2010 |
25/11/2010 |
6 |
£1,400.00 |
Nuneaton |
| 29/11/2010 |
02/12/2010 |
6 |
£1,400.00 |
Nuneaton |
| 06/12/2010 |
09/12/2010 |
6 |
£1,400.00 |
Nuneaton |
| 13/12/2010 |
16/12/2010 |
6 |
£1,400.00 |
Nuneaton |
| 13/12/2010 |
16/12/2010 |
6 |
£1,400.00 |
Thatcham |
|
| B12 |
BODY JIG COURSE |
| DURATION |
2
day(s) |
| INTENDED FOR |
Bodyshop personnel who need to enhance their alignment knowledge and their understanding of vehicle alignment systems. |
| OBJECTIVES |
To enable delegates to develop the confidence and skills required to undertake repairs involving moderate to severe accident damage, using body alignment equipment. Practical involvement and full participation by all delegates will be required to ensure the overall success of this course. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health & Safety associated to alignment systems
2) Repair data and information
3) Vehicle construction - monocoque and independent chassis
4) Practical use of alignment equipment and ancillary items
5) Creation of data |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 29/09/2010 |
30/09/2010 |
6 |
£700.00 |
Thatcham |
| 21/10/2010 |
22/10/2010 |
6 |
£700.00 |
Thatcham |
| 25/10/2010 |
26/10/2010 |
6 |
£700.00 |
Thatcham |
| 02/11/2010 |
03/11/2010 |
6 |
£700.00 |
Thatcham |
| 11/11/2010 |
12/11/2010 |
6 |
£700.00 |
Thatcham |
| 29/11/2010 |
30/11/2010 |
6 |
£700.00 |
Thatcham |
|
| B50 |
PRACTICAL MIG & SPOT WELDING |
| DURATION |
2
day(s) |
| INTENDED FOR |
Personnel who have limited welding experience within the trade. |
| OBJECTIVES |
To provide theoretical and practical knowledge of correct welding methods, which will ensure that the original strength and durability of the vehicle remains substantially unaffected and will conform as closely as possible to the original specification. |
| NOTE |
Attendance on this course is advised prior to accreditation testing. Own welding mask can be used.
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health & Safety requirements
2) Introduction to high strength steels and galvanised steel
3) Correct maintenance and set-up
4) Welding procedures (MIG and resistance spot)
5) Weld inspection and testing procedures |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 27/09/2010 |
28/09/2010 |
4 |
£700.00 |
Nuneaton |
| 04/10/2010 |
05/10/2010 |
6 |
£700.00 |
Nuneaton |
| 14/10/2010 |
15/10/2010 |
6 |
£700.00 |
Thatcham |
| 18/10/2010 |
19/10/2010 |
6 |
£700.00 |
Thatcham |
| 20/10/2010 |
21/10/2010 |
6 |
£700.00 |
Nuneaton |
| 01/11/2010 |
02/11/2010 |
6 |
£700.00 |
Nuneaton |
| 03/11/2010 |
04/11/2010 |
6 |
£700.00 |
Thatcham |
| 09/11/2010 |
10/11/2010 |
6 |
£700.00 |
Nuneaton |
| 15/11/2010 |
16/11/2010 |
6 |
£700.00 |
Nuneaton |
| 16/11/2010 |
17/11/2010 |
6 |
£700.00 |
Nuneaton |
| 17/11/2010 |
18/11/2010 |
6 |
£700.00 |
Nuneaton |
| 22/11/2010 |
23/11/2010 |
6 |
£700.00 |
Thatcham |
| 08/12/2010 |
09/12/2010 |
6 |
£700.00 |
Nuneaton |
| 13/12/2010 |
14/12/2010 |
6 |
£700.00 |
Nuneaton |
| 13/12/2010 |
14/12/2010 |
6 |
£700.00 |
Thatcham |
|
| B68 |
MIG BRAZING |
| DURATION |
1
day(s) |
| INTENDED FOR |
Personal that have limited, to no experience working with the MIG brazing process. Personal intending to progress onto a senior panel ATA assessment. |
| OBJECTIVES |
To demonstrate the techniques used to produce a quality brazed joint. The course provides delegates with a basic introduction and overview of the correct procedure, setup and techniques used in the MIG brazing process. |
| NOTE |
This course is highly recommended as a pre ATA course to bring delegates up to speed on modern MIG brazing techniques.
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health & Safety
2) Differences between MAG welding & MIG brazing
3) Where and when it is appropriate to use MIG brazing
4) Machine setup
5) Assessing the quality of the brazed joint
6) Practical brazing
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 22/09/2010 |
22/09/2010 |
6 |
£350.00 |
Thatcham |
| 30/09/2010 |
30/09/2010 |
6 |
£350.00 |
Nuneaton |
| 04/10/2010 |
04/10/2010 |
6 |
£350.00 |
Thatcham |
| 20/10/2010 |
20/10/2010 |
6 |
£350.00 |
Nuneaton |
| 21/10/2010 |
21/10/2010 |
6 |
£350.00 |
Nuneaton |
| 22/10/2010 |
22/10/2010 |
6 |
£350.00 |
Nuneaton |
| 22/10/2010 |
22/10/2010 |
6 |
£350.00 |
Thatcham |
| 26/10/2010 |
26/10/2010 |
6 |
£350.00 |
Nuneaton |
| 24/11/2010 |
24/11/2010 |
6 |
£350.00 |
Thatcham |
| 03/12/2010 |
03/12/2010 |
6 |
£350.00 |
Thatcham |
| 20/12/2010 |
20/12/2010 |
6 |
£350.00 |
Nuneaton |
|
| B11 |
ADVANCED PANEL & JIG REPAIRS |
| DURATION |
4
day(s) |
| INTENDED FOR |
Body personnel who have at least 3 years? experience within the body repair trade. |
| OBJECTIVES |
To reinstate a damaged vehicle to its original specification using the manufacturer?s repair methods. The tools, alignment equipment and materials used are also approved by the manufacturer. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health & Safety requirements
2) Correlation and preparation of repair data/information
3) Welding procedures - MIG and resistance spot
4) Panel removal and replacement procedure
5) Realignment of structural panels
6) Corrosion prevention - methods and materials
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 27/09/2010 |
30/09/2010 |
6 |
£1,400.00 |
Thatcham |
| 04/10/2010 |
07/10/2010 |
6 |
£1,400.00 |
Thatcham |
| 25/10/2010 |
28/10/2010 |
6 |
£1,400.00 |
Thatcham |
| 02/11/2010 |
05/11/2010 |
6 |
£1,400.00 |
Thatcham |
| 15/11/2010 |
18/11/2010 |
6 |
£1,400.00 |
Thatcham |
| 13/12/2010 |
16/12/2010 |
6 |
£1,400.00 |
Thatcham |
|
| B64 |
ALUMINIUM & COMPOSITE PANEL REPAIR TECHNIQUES |
| DURATION |
2
day(s) |
| INTENDED FOR |
Bodyshop personnel with limited experience or who are involved in panel repairs on aluminium and SMC. |
| OBJECTIVES |
To demonstrate the advantages of basic repair techniques on plastic composite materials and aluminium body panels. The course provides delegates with a basic introduction and overview of the correct procedures for the bonding, welding and rectification of both aluminium and SMC body panels. |
| NOTE |
This course is highly recommended as an engineer/repairer course. As a highly practical course, delegates are expected to dress accordingly and bring appropriate footwear.
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Demonstration and evaluation of repair equipment
2) Component identification and location
3) Repair material availability
4) Eradication of panel damage and tears
5) Welding procedures and techniques
6) Bonding repair procedures
7) Repair methods/techniques
8) Practical exercises
9) Assessing different types of damage
10) Preparation, application and finishing of GRP/SMC fillers |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 20/09/2010 |
21/09/2010 |
6 |
£700.00 |
Thatcham |
| 30/09/2010 |
01/10/2010 |
6 |
£700.00 |
Thatcham |
| 04/10/2010 |
05/10/2010 |
6 |
£700.00 |
Thatcham |
| 14/10/2010 |
15/10/2010 |
6 |
£700.00 |
Thatcham |
| 01/11/2010 |
02/11/2010 |
6 |
£700.00 |
Thatcham |
| 22/11/2010 |
23/11/2010 |
6 |
£700.00 |
Thatcham |
|
| B64A |
ALUMINIUM COSMETIC REPAIRS |
| DURATION |
1
day(s) |
| INTENDED FOR |
Personal that have limited, to no experience working with aluminium.
Personal intending to progress onto a senior panel ATA assessment. |
| OBJECTIVES |
To demonstrate the repair techniques used when performing cosmetic aluminium repairs. The course provides delegates with a basic introduction and overview of the correct procedure for the affective repair of aluminium panels. |
| NOTE |
This course is highly recommended as a pre ATA course to bring delegates up to speed on modern aluminium repair techniques.
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individuals ability and the final results of any end-of-course test, to ensure the delegate meet the required standard. |
| CONTENT |
1) Health and Safety
2) Characteristics of sheet aluminium
3) Aluminium repair processes
4) Working areas
5) Tooling required
6) Heat indictors
7) Eradication of panel damage
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 13/09/2010 |
13/09/2010 |
6 |
£350.00 |
Thatcham |
| 23/09/2010 |
23/09/2010 |
6 |
£350.00 |
Nuneaton |
| 30/09/2010 |
30/09/2010 |
6 |
£350.00 |
Nuneaton |
| 05/10/2010 |
05/10/2010 |
6 |
£350.00 |
Nuneaton |
| 08/10/2010 |
08/10/2010 |
6 |
£350.00 |
Thatcham |
| 13/10/2010 |
13/10/2010 |
6 |
£350.00 |
Thatcham |
| 20/10/2010 |
20/10/2010 |
6 |
£350.00 |
Nuneaton |
| 28/10/2010 |
28/10/2010 |
6 |
£350.00 |
Nuneaton |
| 01/11/2010 |
01/11/2010 |
6 |
£350.00 |
Nuneaton |
| 19/11/2010 |
19/11/2010 |
6 |
£350.00 |
Nuneaton |
| 06/12/2010 |
06/12/2010 |
6 |
£350.00 |
Thatcham |
| 21/12/2010 |
21/12/2010 |
6 |
£350.00 |
Nuneaton |
|
| B64B |
ALUMINIUM STRUCTURAL REPAIRS |
| DURATION |
2
day(s) |
| INTENDED FOR |
Personnel that have an existing knowledge of aluminium repair processes and are looking to advance onto structural repairs.
Personnel seeking an in-depth knowledge of aluminium joining processes such as aluminium welding, bonding and riveting. |
| OBJECTIVES |
To demonstrate the repair techniques used when performing aluminium repairs both with the use of hand tools and dent pulling equipment.
To demonstrate the correct set up and use of aluminium welding equipment.
To demonstrate the joining techniques in use for modern aluminium constructions to include welding, riveting and bonding.
To illustrate the importance of following the correct repair method. |
| NOTE |
This course is designed to give an in-depth knowledge of aluminium repairs and is not manufacturer specific.
All Thatcham courses are certificated. This course contains both practical and written assessments on aluminium joining techniques and structural repairs. |
| CONTENT |
1) Health and Safety
2) Characteristics of sheet aluminium
3) Equipment and tooling required for cosmetic and structural repairs
4) Work shop area/booth requirements
5) Classes of repair
6) Cosmetic repairs
7) Structural repairs
8) Riveting, blind rivets & SPRs (Self Piercing Rivets)
9) Bonding
10) Welding |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 13/09/2010 |
14/09/2010 |
6 |
£700.00 |
Thatcham |
| 22/09/2010 |
23/09/2010 |
6 |
£700.00 |
Thatcham |
| 29/09/2010 |
30/09/2010 |
6 |
£700.00 |
Nuneaton |
| 30/09/2010 |
01/10/2010 |
6 |
£700.00 |
Thatcham |
| 04/10/2010 |
05/10/2010 |
6 |
£700.00 |
Nuneaton |
| 06/10/2010 |
07/10/2010 |
6 |
£700.00 |
Thatcham |
| 11/10/2010 |
12/10/2010 |
6 |
£700.00 |
Thatcham |
| 18/10/2010 |
19/10/2010 |
6 |
£700.00 |
Thatcham |
| 20/10/2010 |
21/10/2010 |
6 |
£700.00 |
Nuneaton |
| 21/10/2010 |
22/10/2010 |
6 |
£700.00 |
Thatcham |
| 26/10/2010 |
27/10/2010 |
6 |
£700.00 |
Nuneaton |
| 01/11/2010 |
02/11/2010 |
6 |
£700.00 |
Thatcham |
| 02/11/2010 |
03/11/2010 |
6 |
£700.00 |
Nuneaton |
| 22/11/2010 |
23/11/2010 |
6 |
£700.00 |
Nuneaton |
| 01/12/2010 |
02/12/2010 |
6 |
£700.00 |
Thatcham |
| 13/12/2010 |
14/12/2010 |
6 |
£700.00 |
Nuneaton |
|
| CPD1 |
CPD PANEL |
| DURATION |
1
day(s) |
| INTENDED FOR |
Bodyshop personnel who want to update or refresh their knowledge |
| OBJECTIVES |
To allow delegates to gain knowledge of panel repair processes and modern materials used in vehicle body construction including repair methods. |
| NOTE |
All Thatcham courses are certificated with either successfully completed or attended in the text. The certificate issued will be determined by the individual’s ability and the final results of any end-of-course test, to ensure the delegate meets the required standard. |
| CONTENT |
1) The use of Thatcham methods
2) Structural revolution of vehicles
3) Energy displacement paths
4) Different generations of steel
5) Panel joining processes
6) Aluminium repair
7) Corrosion protection
8) Practical welding/brazing demonstrations
9) Destructive testing of welds
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 13/09/2010 |
13/09/2010 |
6 |
£350.00 |
Thatcham |
| 17/09/2010 |
17/09/2010 |
6 |
£350.00 |
Thatcham |
| 23/09/2010 |
23/09/2010 |
6 |
£350.00 |
Nuneaton |
| 24/09/2010 |
24/09/2010 |
5 |
£350.00 |
Thatcham |
| 29/09/2010 |
29/09/2010 |
6 |
£350.00 |
Nuneaton |
| 30/09/2010 |
30/09/2010 |
6 |
£350.00 |
Nuneaton |
| 18/10/2010 |
18/10/2010 |
6 |
£350.00 |
Thatcham |
| 20/10/2010 |
20/10/2010 |
6 |
£350.00 |
Nuneaton |
| 05/11/2010 |
05/11/2010 |
6 |
£350.00 |
Thatcham |
| 25/11/2010 |
25/11/2010 |
6 |
£350.00 |
Thatcham |
| 08/12/2010 |
08/12/2010 |
6 |
£350.00 |
Thatcham |
| 15/12/2010 |
15/12/2010 |
6 |
£350.00 |
Thatcham |
|
| TA1 |
ATA PANEL TECHNICIAN |
| DURATION |
2
day(s) |
| INTENDED FOR |
Click here for more details |
| OBJECTIVES |
See above link for further details |
| NOTE |
Panel ATA Guidelines for Candidates can be downloaded here.
'Further Guidance for Candidates' from IMI Awards is available here.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
See above link for further details |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 13/09/2010 |
14/09/2010 |
4 |
£850.00 |
Thatcham |
| 15/09/2010 |
16/09/2010 |
4 |
£850.00 |
Nuneaton |
| 22/09/2010 |
23/09/2010 |
4 |
£850.00 |
Nuneaton |
| 27/09/2010 |
28/09/2010 |
3 |
£850.00 |
Thatcham |
| 29/09/2010 |
30/09/2010 |
4 |
£850.00 |
Nuneaton |
| 07/10/2010 |
08/10/2010 |
4 |
£850.00 |
Nuneaton |
| 20/10/2010 |
21/10/2010 |
4 |
£850.00 |
Nuneaton |
| 21/10/2010 |
22/10/2010 |
4 |
£850.00 |
Thatcham |
| 27/10/2010 |
28/10/2010 |
4 |
£850.00 |
Thatcham |
| 10/11/2010 |
11/11/2010 |
4 |
£850.00 |
Nuneaton |
| 17/11/2010 |
18/11/2010 |
4 |
£850.00 |
Nuneaton |
| 22/11/2010 |
23/11/2010 |
4 |
£850.00 |
Thatcham |
| 24/11/2010 |
25/11/2010 |
4 |
£850.00 |
Nuneaton |
| 01/12/2010 |
02/12/2010 |
4 |
£850.00 |
Nuneaton |
| 06/12/2010 |
07/12/2010 |
4 |
£850.00 |
Thatcham |
| 08/12/2010 |
09/12/2010 |
4 |
£850.00 |
Nuneaton |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA1U |
ATA PANEL TECHNICIAN UPGRADE |
| DURATION |
1
day(s) |
| INTENDED FOR |
Existing panel technician ATA holders who wish to upgrade to senior panel ATA status.
Click here for more details |
| OBJECTIVES |
To gain senior panel status.
Click here for more details |
| NOTE |
Panel ATA Guidelines for Candidates can be downloaded here.
'Further Guidance for Candidates' from IMI Awards is available here.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
- PANS 01-01 use of body jig
- PANS 04-01 MIG Brazing
- PANS05-01 Repair aluminium cosmetic panel
- plus Senior Panel knowledge test
|
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 15/09/2010 |
15/09/2010 |
2 |
£500.00 |
Nuneaton |
| 16/09/2010 |
16/09/2010 |
2 |
£500.00 |
Nuneaton |
| 17/09/2010 |
17/09/2010 |
2 |
£500.00 |
Nuneaton |
| 22/09/2010 |
22/09/2010 |
2 |
£500.00 |
Nuneaton |
| 23/09/2010 |
23/09/2010 |
2 |
£500.00 |
Nuneaton |
| 24/09/2010 |
24/09/2010 |
2 |
£500.00 |
Nuneaton |
| 27/10/2010 |
27/10/2010 |
2 |
£500.00 |
Nuneaton |
| 10/11/2010 |
10/11/2010 |
2 |
£500.00 |
Nuneaton |
| 11/11/2010 |
11/11/2010 |
2 |
£500.00 |
Nuneaton |
| 17/11/2010 |
17/11/2010 |
2 |
£500.00 |
Nuneaton |
| 24/11/2010 |
24/11/2010 |
2 |
£500.00 |
Nuneaton |
| 25/11/2010 |
25/11/2010 |
2 |
£500.00 |
Nuneaton |
| 06/12/2010 |
06/12/2010 |
2 |
£500.00 |
Nuneaton |
| 15/12/2010 |
15/12/2010 |
2 |
£500.00 |
Nuneaton |
| 16/12/2010 |
16/12/2010 |
2 |
£500.00 |
Nuneaton |
| 17/12/2010 |
17/12/2010 |
2 |
£500.00 |
Nuneaton |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA111 |
ATA PANEL RETAKES |
| DURATION |
1
day(s) |
| INTENDED FOR |
Delegates that have been referred after taking either the ATA Panel Technician(TA2) or the ATA Senior Panel Technician (TA11) |
| OBJECTIVES |
To complete the Panel Technician and Senior Panel Technician ATA Accreditation |
| NOTE |
We have designed this particular session for any candidates that have been on an ATA and referred. However it is only available for candidates who have been referred on one or two practical elements.
If a candidate has been referred on three or more practical elements, they will be required to resit a whole new assessment from scratch and would therefore need to apply to attend the TA4P sessions.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
The price of this assessment will vary depending on the elements that the individual delegate needs to retake. Please discuss the price with our ATA team on 01635 294851 |
| CONTENT |
See details for ATA Panel Technician (TA1) and
ATA Senior Panel Technician (TA11) |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 15/09/2010 |
15/09/2010 |
3 |
POA |
Nuneaton |
| 16/09/2010 |
16/09/2010 |
3 |
POA |
Nuneaton |
| 22/09/2010 |
22/09/2010 |
1 |
POA |
Nuneaton |
| 24/09/2010 |
24/09/2010 |
3 |
POA |
Thatcham |
| 24/09/2010 |
24/09/2010 |
2 |
POA |
Nuneaton |
| 19/10/2010 |
19/10/2010 |
3 |
POA |
Thatcham |
| 29/10/2010 |
29/10/2010 |
3 |
POA |
Thatcham |
| 12/11/2010 |
12/11/2010 |
3 |
POA |
Nuneaton |
| 26/11/2010 |
26/11/2010 |
3 |
POA |
Thatcham |
| 10/12/2010 |
10/12/2010 |
3 |
POA |
Thatcham |
| 16/12/2010 |
16/12/2010 |
3 |
POA |
Nuneaton |
| 16/12/2010 |
16/12/2010 |
3 |
POA |
Nuneaton |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA11T |
ATA PANEL SENIOR TECHNICIAN PREPARATION |
| DURATION |
2
day(s) |
| INTENDED FOR |
This course/ coaching session has been developed for senior technicians who don’t require full training but would benefit from update and additional knowledge about certain elements of the senior panel tech ATA, such as aluminium repair, jig system and current panel preparation/ welding procedures. |
| OBJECTIVES |
To update and discuss what standards and knowledge is required for successful completion of a senior panel ATA |
| NOTE |
This is not an in depth training course but is intended to refine the skills and update what is required for completion of repairs/ procedures to Manufacturers/ Thatcham standards and meeting the ATA criteria.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
1) Pre online questions
2) MAG welding Standards/ coaching
3) MIG Brazing requirements/ coaching
4) Spot welding/ coaching
5) Panel repairs
6) Application of body filler/ requirements
7) Aluminium panel repairs/ coaching
8) Jig set-up and data recording/ coaching
9) Panel alignment requirements
10) Welded panel removal replacement procedures |
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 13/09/2010 |
14/09/2010 |
3 |
£700.00 |
Nuneaton |
| 13/09/2010 |
14/09/2010 |
5 |
£700.00 |
Thatcham |
| 20/09/2010 |
21/09/2010 |
6 |
£700.00 |
Thatcham |
| 04/10/2010 |
05/10/2010 |
5 |
£700.00 |
Thatcham |
| 04/10/2010 |
05/10/2010 |
6 |
£700.00 |
Nuneaton |
| 11/10/2010 |
12/10/2010 |
5 |
£700.00 |
Thatcham |
| 25/10/2010 |
26/10/2010 |
6 |
£700.00 |
Nuneaton |
| 25/10/2010 |
26/10/2010 |
6 |
£700.00 |
Nuneaton |
| 25/10/2010 |
26/10/2010 |
6 |
£700.00 |
Thatcham |
| 01/11/2010 |
02/11/2010 |
6 |
£700.00 |
Nuneaton |
| 01/11/2010 |
02/11/2010 |
6 |
£700.00 |
Thatcham |
| 08/11/2010 |
09/11/2010 |
6 |
£700.00 |
Nuneaton |
| 15/11/2010 |
16/11/2010 |
6 |
£700.00 |
Nuneaton |
| 22/11/2010 |
23/11/2010 |
6 |
£700.00 |
Nuneaton |
| 22/11/2010 |
23/11/2010 |
6 |
£700.00 |
Thatcham |
| 29/11/2010 |
30/11/2010 |
6 |
£700.00 |
Thatcham |
| 06/12/2010 |
07/12/2010 |
6 |
£700.00 |
Thatcham |
| 06/12/2010 |
07/12/2010 |
6 |
£700.00 |
Nuneaton |
| 13/12/2010 |
14/12/2010 |
6 |
£700.00 |
Nuneaton |
|
| TA11 |
ATA PANEL TECHNICIAN - SENIOR |
| DURATION |
3
day(s) |
| INTENDED FOR |
Click here for more details |
| OBJECTIVES |
See above link for further details |
| NOTE |
Panel ATA Guidelines for Candidates can be downloaded here.
'Further Guidance for Candidates' from IMI Awards is available here.
To ensure currency of assessments the IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning.
|
| CONTENT |
See above link for further details |
| ATA CURRICULUM |
The following
courses in the Thatcham training programme provide delegates with
practical and theoretical knowledge that underpins some or all of
the competencies and skills that are tested in this ATA
Assessment:
|
| AVAILABLE DATES |
| Start Date |
End Date |
Spaces Available |
Cost |
Location |
| 15/09/2010 |
17/09/2010 |
1 |
£1,350.00 |
Nuneaton |
| 15/09/2010 |
17/09/2010 |
3 |
£1,350.00 |
Thatcham |
| 22/09/2010 |
24/09/2010 |
3 |
£1,350.00 |
Thatcham |
| 22/09/2010 |
24/09/2010 |
4 |
£1,350.00 |
Nuneaton |
| 06/10/2010 |
08/10/2010 |
2 |
£1,350.00 |
Thatcham |
| 06/10/2010 |
08/10/2010 |
3 |
£1,350.00 |
Nuneaton |
| 13/10/2010 |
15/10/2010 |
4 |
£1,350.00 |
Thatcham |
| 20/10/2010 |
22/10/2010 |
4 |
£1,350.00 |
Nuneaton |
| 26/10/2010 |
28/10/2010 |
4 |
£1,350.00 |
Nuneaton |
| 27/10/2010 |
29/10/2010 |
4 |
£1,350.00 |
Nuneaton |
| 27/10/2010 |
29/10/2010 |
4 |
£1,350.00 |
Thatcham |
| 03/11/2010 |
05/11/2010 |
4 |
£1,350.00 |
Nuneaton |
| 03/11/2010 |
05/11/2010 |
4 |
£1,350.00 |
Thatcham |
| 10/11/2010 |
12/11/2010 |
4 |
£1,350.00 |
Nuneaton |
| 17/11/2010 |
19/11/2010 |
4 |
£1,350.00 |
Nuneaton |
| 24/11/2010 |
26/11/2010 |
4 |
£1,350.00 |
Nuneaton |
| 24/11/2010 |
26/11/2010 |
4 |
£1,350.00 |
Thatcham |
| 01/12/2010 |
03/12/2010 |
4 |
£1,350.00 |
Thatcham |
| 08/12/2010 |
10/12/2010 |
4 |
£1,350.00 |
Nuneaton |
| 08/12/2010 |
10/12/2010 |
4 |
£1,350.00 |
Thatcham |
| 15/12/2010 |
17/12/2010 |
4 |
£1,350.00 |
Nuneaton |
Please use the following
Booking Form.
Please indicate on the front sheet of your ATA Application
form if your delegate has any special needs that Thatcham need to be aware of.
Also, please indicate your BSI Audit/Inspection date, if you are applying for PAS 125.
This will assist us to ensure delegates are offered assessment dates, where possible,
prior to the audit/inspection taking place.
Thatcham will require the original copy of the application form for audit purposes,
however, customers may also fax their application to us for initial processing
to book a place on one of the above courses. Please read our Booking Terms and Cancellation Policy.
|
| TA-IT |
ATA TASK INTENSIVE TRAINING |
| DURATION |
0.5
day(s) |
| INTENDED FOR |
Delegates who have been referred after taking either the ATA Technician Accreditation or the ATA Senior Technician Accreditation |
| OBJECTIVES |
To undertake intensive training in the task/s relating to the referral items in their particular discipline for the ATA Accreditation |
| NOTE |
We have designed this particular session for any delegates that have undertaken an ATA and have been referred. However, it is only available for delegates who have been referred on one or two elements.
The cost of this intensive training will be charged at £195 + vat per delegate.
Once the delegate has attended the intensive training, they will be able to undertake a retake for those referred tasks in their chosen discipline.
The price of a partial retake will vary depending on the particular elements on which the individual delegate has been referred.
If a delegate has been referred on three or more practical elements, it is highly recommended that the delegate attends the Preparation course designed for their relevant discipline, prior to a full retake of their particular assessment.
The IMI have stated that no more that 12 months may elapse between the first assessment and the last successful assessment. Therefore once the 12 month period has expired, a delegate will be required to commence all elements of their chosen assessment from the beginning. |
| CONTENT |
See details for ATA Technician or ATA Senior Technician for the delegates chosen discipline in the ATA Registered Bodyshop Technician section of our web site |
| AVAILABLE DATES |
No current dates are available.
|
|
|
